How to get rid of a tree stump with charcoal: As much as the trees are essential to the environment, it reaches a point where you have to get rid of them.
Once you cut down the tree, you will be left with its stump which may make your lawn look ugly.
In this article I’m going to give you tips on how to get rid of a tree stump with charcoal.
Click here to learn how to light charcoal without using a liquid lighter.
There are different ways you to adopt to remove the stump, using charcoal being one of the easiest, cheapest and effective.
Let’s get started,
- A-List of Ways On How To Get Rid Of A Tree Stump With Charcoal
- How to Get Rid Of a Tree Stump with Charcoal With Best Results
- Advantages of using Charcoal for Stump Removal
- Final Thoughts on How to Get Rid of Tree Stump with Charcoal
A-List of Ways On How To Get Rid Of A Tree Stump With Charcoal
In this article I have compiled some of the tips on how to get rid of a tree stump with charcoal. Lets get started:
Also read on backyard fire pit laws
1. Dig around the tree stump base
Use a shovel to dig around the stump. Go as deep as possible using any other tools you have at your disposal.
This step aims to ensure as much of the roots are exposed for easier burning.
2. Drill Holes in the stump
Drill a good number of holes on the tree stump surface and sides.
Ideally, let the holes go as deep as your drill permits.
A power drill will come in handy in this case.
3. Pour Vegetable oil in the Holes and on the stump.
For an average-sized tree stump, get about two liters of vegetable oil and pour it inside the holes.
The remaining oil should be poured on other parts of the stump, including the roots.
It is recommended that you leave the oil to soak overnight before repeating this process.
If you can douse the tree stump with vegetable oil for three days straight, the better.
The aim is to ensure that the tree stump is well soaked with oil.
This will make it burn faster and ensure that the fire consumes all bits at the end of the day.
4. Place Charcoal on Stump
Now that the stump is saturated with oil, it is time to bring the main ingredient- charcoal.
You can take a few pieces and arrange them on the stump or put the bag containing the charcoal on the stump. (Source)
It would help if you also got some pieces for the area around the base where the roots are exposed.
Arrange them well, so they fill the spaces between the exposed roots.
5. Light it up
Once the charcoal is in place you can light up the stump.
It is advisable to remove all inflammable items around the tree stump.
You also need to note the direction of the wind and ensure that your flame is now being blown in an unfavorable direction.
It is advisable to stay close to the stump as the charcoal burns.
This way, you can monitor progress and intervene in time if the flame is not behaving as expected.
Once the charcoal heap is all burnt, leave the tree stump to rest and start the following day.
Continue with this process until the tree stump has been burned to the ground.
After a few days, you will notice that the tree is shriveling on its own.
You can remove any chucks that come off to help quicken the process, but the job is pretty much done at this point.
6. Clean up
The charcoal process creates quite a mess, so you need to clean up once you have achieved the desired results.
You can start this process by digging up and removing any roots left.
Since the fire will have done a number on them, this process should be easy.
A shovel may be all you need to bring the roots to the surface.
If you leave the fire to burn out on its own, it is highly likely that there will be no roots left for you to dig up.
Next is removing the ash. If some grass or other vegetation was burnt during the stump removal process, you might need to remove the burnt bits and replace them.
There will be a hole left on the ground once the stump is gone.
You can decide to fill the hole up and plant grass or whichever item you have in mind over it.
How to Get Rid Of a Tree Stump with Charcoal With Best Results
Checking the weather forecast
You need at least four dry days to burn the tree stump to the ground.
If these can be followed by rain days that will put the fire completely out, the better.
Also, note the wind strength and direction.
Avoid using this method on very windy days as the fire may get out of hand.
Also Read: Best Anti Fog Airsoft Goggles
Aside from knowing how to get rid of a tree stump with charcoal, you also need some fire control skills.
The only danger with this method is that the fire may get out of control.
To prevent this from happening, ensure that you are there to check on progress.
At times, you may be forced to dampen the area around the stump to prevent underground fire.
In case the fire starts spreading, put it out immediately, and continue at a later time when the weather is favorable.
You can always add more cooking oil to the stump so it will burn easier the following day.
If you have a dilapidated wooden structure you would like to get rid of, you can add this as fuel and kill two birds with one stone.
Leave the fire to burn out once the stump is out.
Even if the stump is gone, don’t put out the fire.
Let it burn for the next few days so that the fire will consume all roots and debris.
Just keep checking the area every few hours, so you don’t get surprised by an accidental fire.
Advantages of using Charcoal for Stump Removal
The entire process takes just a few days
Using charcoal is much faster when compared to a natural process such as rotting.
Once your tree stamp starts rotting, the shortest you can expect the process to be completed in four months.
Using charcoal helps you get the desired results much quicker.
The process may be slower than pulling or grinding, which takes a few hours, but it is a much better option than rotting.
It is Cheap
Charcoal is relatively cheap, and you most likely have some of it for your fireplace or kitchen.
If you consider how much you need to rent a grinder or hire a professional stump removal, you will realize just how cheap charcoal is.
You don’t need and Extra pair of Hands.
If you live alone, using charcoal to get rid of a tree stamp is achievable. All you need is charcoal and some fire lighting skills.
The process is not as physically tasking compared to uprooting of digging.
You may need to trim the stump and drill a few holes, but otherwise, you don’t need much energy to accomplish your goal.
No Loud Heavy-duty Machines
You do not need a powerful machine to eliminate the tree stand.
A power drill, chainsaw, charcoal, and matches are all you need.
Final Thoughts on How to Get Rid of Tree Stump with Charcoal
From the above information i hope you’re now aware of how to get rid of a tree stump with charcoal
The best part of using charcoal is that it is the cheapest and you may not require extra hands for help.
The process only takes a few days to complete so you’ll have to be patient.
Make sure you clean up the area since the fire can cause some mess to get the desired results.
Ensure you keep the safety precautions since fire can be hazardous if not well managed.
Also Read on Lawn Mower Brands to Avoid